• Good Quality Threaded Pipe Rubber Joint - A-5 ~Threaded Union – Lide

    Good Quality Threaded Pipe Rubber Joint - A-5 ~Threaded Union – Lide

    Our available goods Threaded unions is used When an economical threaded pipe connection is needed, the surface of the union is available both hot-dip galvanizing and electroplating. Both ends provided with a malleable iron union with female thread BS or ANSI. Specifications I II III Working Pressure Mpa (Kgf/Cm2) 1Mpa (10) 1.6 (16) 2.5 (25) Test Pressure 1.5Mpa 2.4Mpa 3.75Mpa Burst Pressure Mpa (Kgf/Cm2) 3 (30) 4.8 (48) 5.5 (55) Vacuum Kpa (Kgf/Cm2)...
  • professional factory for Joint Rubber - A-7 ~Rubber Pipe Connector – Lide

    professional factory for Joint Rubber - A-7 ~Rubber Pipe Connector – Lide

    Our available goods Rubber Pipe is an economical, abrasion-resistant replacement for steel and cast iron pipe, either in straight lengths or where a specified radius is required. B-1 Rubber Pipe may be used in conveying ore, corrosive chemicals, sand,and other abrasive slurries. It is absolutely necessary that rigid metal pipe on both ends of the pipe be properly anchored to eliminate the danger of excessive elongation. If the pipeline is not anchored, control units should be used. Material: ...
  • Europe style for Flexible Joint - Abrasion resistance rubber expansion joints – Lide

    Europe style for Flexible Joint - Abrasion resistance rubber expansion joints – Lide

    Expansion rubber joints are assembled on the piping, which can reduce the vibration, reduce noise, protect pipe system from start-up forces as well as system surges, compensate movements and misalignments from the piping line. The rubber joints are used below systems, but not limited Commercial HVAC systems Industrial piping systems Power plants Sewage treatment plants The material of tube is reinforced natural rubber, which can increase the abrasion resistance, worn-resistance. This rubber m...
  • Factory wholesale Butyl Expansion Rubber Joints - A-1 ~Single Arch Rubber Expansion Joint – Lide

    Factory wholesale Butyl Expansion Rubber Joints - A-1 ~Single Arch Rubber Expansion Joint – Lide

    Our available goods The single-arch product can reduce the vibration and noise, which can also solve the axial/lateral/angular movements/eccentric problems. Reinforcement layer of the bellows by Nylon cords and at both ends by hardened steel wire rings. The floating steel flanges are drilled according to DIN, ANSI, BS, JIS and other standards. If the piping pressure is much higher, reinforced bolts should be assembled together with flanges. Specifications I II III Working Pressu...
  • New Delivery for Wras Approved Epdm Rubber Gasket - A-7 ~Rubber Pipe Connector – Lide

    New Delivery for Wras Approved Epdm Rubber Gasket - A-7 ~Rubber Pipe Connector – Lide

    Our available goods Rubber Pipe is an economical, abrasion-resistant replacement for steel and cast iron pipe, either in straight lengths or where a specified radius is required. B-1 Rubber Pipe may be used in conveying ore, corrosive chemicals, sand,and other abrasive slurries. It is absolutely necessary that rigid metal pipe on both ends of the pipe be properly anchored to eliminate the danger of excessive elongation. If the pipeline is not anchored, control units should be used. Material: ...
  • Factory For Malaysia Rubber Bellow Distributor - A-3 ~Wide Arch Rubber Expansion Joint – Lide

    Factory For Malaysia Rubber Bellow Distributor - A-3 ~Wide Arch Rubber Expansion Joint – Lide

    Our available goods Wide arch system is the molded expansion joint, with integral flange and without a metal reinforcement at the neck of the body. Wide arch allows greater movements and low spring rates comparing to spool type. WA and WAF is used for an economical wide arch rubber expansion joint.  WAF is filled arch, with 50% of the WA allowed movements, but it has 4 times spring rates than wide arch. Specifications I II III Working Pressure Mpa (Kgf/Cm2) 1Mpa (10) 1.6 (16...
  • OEM/ODM Factory Ce Approved Epdm Expansion Rubber Joint - A-5 ~Threaded Union – Lide

    OEM/ODM Factory Ce Approved Epdm Expansion Rubber Joint - A-5 ~Threaded Union – Lide

    Our available goods Threaded unions is used When an economical threaded pipe connection is needed, the surface of the union is available both hot-dip galvanizing and electroplating. Both ends provided with a malleable iron union with female thread BS or ANSI. Specifications I II III Working Pressure Mpa (Kgf/Cm2) 1Mpa (10) 1.6 (16) 2.5 (25) Test Pressure 1.5Mpa 2.4Mpa 3.75Mpa Burst Pressure Mpa (Kgf/Cm2) 3 (30) 4.8 (48) 5.5 (55) Vacuum Kpa (Kgf/Cm2)...
  • PriceList for Reducing Rubber Expansion Joint - A-1 ~Single Arch Rubber Expansion Joint – Lide

    PriceList for Reducing Rubber Expansion Joint - A-1 ~Single Arch Rubber Expansion Joint – Lide

    Our available goods The single-arch product can reduce the vibration and noise, which can also solve the axial/lateral/angular movements/eccentric problems. Reinforcement layer of the bellows by Nylon cords and at both ends by hardened steel wire rings. The floating steel flanges are drilled according to DIN, ANSI, BS, JIS and other standards. If the piping pressure is much higher, reinforced bolts should be assembled together with flanges. Specifications I II III Working Pressu...
  • Fast delivery Reducing Rubber Expansion Joint - A-6 ~Control Units – Lide

    Fast delivery Reducing Rubber Expansion Joint - A-6 ~Control Units – Lide

    Our available goods A control unit assembly is a system of two or more control rods placed across an expansion joint from flange to flange to minimize possible damage to the expansion joint caused by excessive motion of the pipeline. The control rod assemblies are set at the maximum allowable expansion and/or contraction of the joint and will absorb the static pressure thrust developed at the expansion joint. When used in this manner, they are an additional safety factor, minimizing possible ...
  • Leading Manufacturer for High Pressure Rubber Joint - A-1 ~Single Arch Rubber Expansion Joint – Lide

    Leading Manufacturer for High Pressure Rubber Joint - A-1 ~Single Arch Rubber Expansion Joint – Lide

    Our available goods The single-arch product can reduce the vibration and noise, which can also solve the axial/lateral/angular movements/eccentric problems. Reinforcement layer of the bellows by Nylon cords and at both ends by hardened steel wire rings. The floating steel flanges are drilled according to DIN, ANSI, BS, JIS and other standards. If the piping pressure is much higher, reinforced bolts should be assembled together with flanges. Specifications I II III Working Pressu...
  • Free sample for Rubber Flexible Bellow - A-3 ~Wide Arch Rubber Expansion Joint – Lide

    Free sample for Rubber Flexible Bellow - A-3 ~Wide Arch Rubber Expansion Joint – Lide

    Our available goods Wide arch system is the molded expansion joint, with integral flange and without a metal reinforcement at the neck of the body. Wide arch allows greater movements and low spring rates comparing to spool type. WA and WAF is used for an economical wide arch rubber expansion joint.  WAF is filled arch, with 50% of the WA allowed movements, but it has 4 times spring rates than wide arch. Specifications I II III Working Pressure Mpa (Kgf/Cm2) 1Mpa (10) 1.6 (16...
  • Factory wholesale 6 Inch Rubber Coupling - A-5 ~Threaded Union – Lide

    Factory wholesale 6 Inch Rubber Coupling - A-5 ~Threaded Union – Lide

    Our available goods Threaded unions is used When an economical threaded pipe connection is needed, the surface of the union is available both hot-dip galvanizing and electroplating. Both ends provided with a malleable iron union with female thread BS or ANSI. Specifications I II III Working Pressure Mpa (Kgf/Cm2) 1Mpa (10) 1.6 (16) 2.5 (25) Test Pressure 1.5Mpa 2.4Mpa 3.75Mpa Burst Pressure Mpa (Kgf/Cm2) 3 (30) 4.8 (48) 5.5 (55) Vacuum Kpa (Kgf/Cm2)...
123456 Next > >> Page 1 / 309